|
Corporate Social Responsibility
News
3.19.2008 - 12:46pm ET
|
CSR News from:
|
Vineck Manufacturing & Sales
|
|
News Categories: |
| | |
Vineck Company Develops 21st Century Technology for Backup Generators
The Vineck Co. introduced its Hybrid Standby/Emergency Power Generator. Vineck's technology provides a backup generator that is 90% more efficient than present day backup generator technology
(CSRwire) March 19, 2008 - The Vineck Company released our Hybrid Standby/Emergency
Power Generator (Pat. Pending) that is the next generation of backup
generators for the 21st century. Addressing many of the faults of
present-day generator technology developed our Hybrid Generator
technology.
Present-day backup generator technology is based on sensing the presence
or loss of utility power, regardless of the need for electrical energy.
When utility power is lost, these generators are started and run
continuously until utility power is restored. This is a very primitive
approach, and also very, very, costly in fuel to operate.
For example; an average size residential home, with predetermined loads
requiring backup power; Sump Pump, Refrigerator, Furnace, Lighting, and
TV. Manufacturers utilizing today’s generator technology will specify a
12,000-watt standby generator. The 12,000 watts is based on adding
together all the predetermined loads, and calculating they will, at some
point, all require electrical energy at the same time.
Their calculation is indeed warranted because these items do occasionally
require electrical power simultaneously, however it happens rarely. The
fact that it could happen even once requires generator manufacturers to
size the generator according to whatever load may be imposed, and 25%
more. Present day standby generator technology is designed to do just
that; at the loss of utility power, the standby generator automatically
starts and stands by to provide rated power. If the outage lasts 48 hours,
the standby generator will run 48 hrs, burning fuel 48 hrs, in order to
standby to provide 12,000 watts.
The sump pump, refrigerator, furnace, lighting are all 'intermittent'
loads. Sump pumps rarely start during cold winter months, furnace (800
watts) may operate every 30 out of 60 minutes totaling 24hours in a 48 hr
period (19.2 kWh), refrigerator (800 watts) may operate every 10 out of 60
minutes totaling 4.8 hours in a 48 hr period (3.8 kWh), lighting and TV
(1000 watts) will be turned on as needed, we can also give 24 hrs usage
out of 48 hrs (24 kWh) for a total of 47 kWh
So in the 48-hour period, we only needed 47 kWh; However, present day
generator technology cannot provide electrical energy as needed, it can
only provide its rated output. So our 12,000-watt generator burned fuel
for 48 hrs to provide 576 kWh standby electrical energy, of which 47 kWh
was actually needed. Of the natural gas or lp gas required to produce the
576 kWh, 529 kWh was wasted.
Vineck technology is based on sensing not only utility-power loss, but
also the need for electrical energy. Vineck technology utilizes special
batteries to store bulk power, inverter and controller, and a small
1000-watt generator. For the example above, at the loss of power, a
transfer switch connects the sump, furnace, refrigerator, lighting & TV to
battery power. As the battery power is drained, the 1000-watt generator
starts to recharge the batteries; it cycles on and off to deliver only the
electrical energy required. Further benefits are:
Our Hybrid Generator can be recharged with a roof top 400-watt wind
generator and solar panels. Furthermore, our batteries are the same used
in wind and solar applications, and can easily be adapted to green energy.
Our Hybrid Generator is also easily expandable by adding more batteries,
providing for more bulk reserve power.
Our Hybrid Generator is also adaptable for those who have generators, they
can use their generator to charge our system rather than purchase our
generator.
We intend to build a 21st century manufacturing and distribution facility.
However, this does not mean that we want to build an automated
manufacturing and exclude people; rather we realize that we need to
provide good paying jobs to those who will buy our products. Our 21st
century facility will be powered via a combination of solar and wind
electric generation equipment that we will maintain.
Our plans include building a 1 million sq. Ft. manufacturing and
distribution facility, powered by wind and solar to manufacture our
products. Hybrid Generator Dealerships are available in the 50 US states,
starting at $75,000.
|
|